;Example program showing how to use some of the commMg3.au3 UDF functions
;this example is a very simple terminal
;Version 2 26th July 2006
;changes-
;change flow control checkbox to combo and add NONE
;correct error in call to _CommSetPort - stop bits were missing which meant th eflow control was used for stop bits
;Dec 2013 - correct setting of Parity and flow, thanks to MichaelXMike
#include <GUIConstants.au3>
#include <CommMG.au3>;or if you save the commMg.dll in the @scripdir use #include @SciptDir & '\commmg.dll'
#include <GuiEdit.au3>
#include <GuiComboBox.au3>
#include <windowsconstants.au3>
#include <buttonconstants.au3>
#include <Array.au3>
Opt("WINTITLEMATCHMODE", 3)
;Opt("OnExitFunc","alldone")
HotKeySet("{ESC}", "alldone")
$result = '';used for any returned error message setting port
Const $settitle = "COMMG listExample - set Port", $maintitle = "COMMG Example"
$setflow = 2;default to no flow control
Dim $FlowType[3] = ["Hardware (RTS, CTS)", "XOnXoff", "NONE"]
Dim $ParityType[5] = ["odd", "even", "none", "Mark", "Space"]
#region main program
#Region ### START Koda GUI section ### Form=d:\my documents\miscdelphi\commg\ExampleComm.kxf
$Form2 = GUICreate("COMMG Example", 473, 349, 339, 333, BitOR($WS_MAXIMIZEBOX, $WS_MINIMIZEBOX, $WS_SIZEBOX, $WS_THICKFRAME, $WS_SYSMENU, $WS_CAPTION, _
$WS_OVERLAPPEDWINDOW, $WS_TILEDWINDOW, $WS_POPUP, $WS_POPUPWINDOW, $WS_GROUP, $WS_TABSTOP, $WS_BORDER, $WS_CLIPSIBLINGS))
$Edit1 = GUICtrlCreateEdit("", 10, 25, 449, 223, BitOR($ES_AUTOVSCROLL, $ES_AUTOHSCROLL, $ES_READONLY, $ES_WANTRETURN, $WS_HSCROLL, $WS_VSCROLL))
$BtnSend = GUICtrlCreateButton("Send", 380, 273, 53, 30, $BS_FLAT)
$Input1 = GUICtrlCreateInput("", 18, 279, 361, 21)
$Checkbox1 = GUICtrlCreateCheckbox("Add LF to incomming CR", 273, 4, 145, 17)
GUICtrlSetState(-1, $GUI_CHECKED)
GUICtrlSetResizing(-1, $GUI_DOCKAUTO)
$Label11 = GUICtrlCreateLabel("Text to send", 24, 261, 63, 17)
$BtnSetPort = GUICtrlCreateButton("Set Port", 16, 312, 73, 30, $BS_FLAT)
$Label21 = GUICtrlCreateLabel("Received text", 34, 6, 70, 17)
$Label31 = GUICtrlCreateLabel("commg.dll version unknown", 272, 328, 135, 17)
GUICtrlSetColor(-1, 0x008080)
GUISetState(@SW_SHOW)
#EndRegion ### END Koda GUI section ###
WinSetTitle($Form2, "", $maintitle & " UDF = " & _CommGetVersion(1))
While setport(0) = -1
If MsgBox(4, 'Port not set', 'Do you want to quite the program?') = 6 Then Exit
WEnd
ConsoleWrite("stage 1" & @CRLF)
GUICtrlSetData($Label31, 'using ' & _CommGetVersion(1))
ConsoleWrite("stage 2" & @CRLF)
Events()
ConsoleWrite("at 64" & @CRLF)
_CommSetXonXoffProperties(11, 13, 100, 100)
;consolewrite("return from set timeouts = " & _CommSetTimeouts(5,5,5,5,5) & @CR)
GUICtrlSetState($Edit1, $GUI_FOCUS)
ConsoleWrite("at 67" & @CRLF)
While 1
;sleep(40)
;gets characters received returning when one of these conditions is met:
;receive @CR, received 20 characters or 200ms has elapsed
$instr = _commGetLine(@CR, 20, 200);_CommGetString()
If $instr <> '' Then;if we got something
If GUICtrlRead($Checkbox1) = $GUI_CHECKED Then $instr = StringReplace($instr, @CR, @CRLF)
FileWrite(@ScriptDIr & "/Data.txt", $instr)
GUICtrlSetData($Edit1, $instr, 1)
Else
Sleep(20) ;MichaelXMike
EndIf
WEnd
Alldone()
Func port11()
;MsgBox(0,'now set to channel',_CommSwitch(2))
_commSwitch(2)
$s2 = "1 2 3 4";_CommGetString()
ConsoleWrite("comm1 gets " & $s2 & @CRLF)
_CommSendString($s2)
_CommSwitch(1)
EndFunc ;==>port11
#endregion main program
Func Events()
Opt("GUIOnEventMode", 1)
GUISetOnEvent($GUI_EVENT_CLOSE, "justgo")
GUICtrlSetOnEvent($BtnSend, "SendEvent")
GUICtrlSetOnEvent($BtnSetPort, "SetPortEvent")
EndFunc ;==>Events
Func SetPortEvent()
setport();needed because a parameter is optional for setport so we can't use "setport" for the event
GUICtrlSetState($Edit1, $GUI_FOCUS)
EndFunc ;==>SetPortEvent
Func justgo()
Exit
EndFunc ;==>justgo
Func SendEvent();send the text in the inputand append CR
_CommSendstring(GUICtrlRead($Input1) & @CR)
GUICtrlSetData($Input1, '');clear the input
;GUICtrlSetState($edit1,$GUI_FOCUS);sets the caret back in the terminal screen
EndFunc ;==>SendEvent
Func AllDone()
;MsgBox(0,'will close ports','')
_Commcloseport(true)
;MsgBox(0,'port closed','')
Exit
EndFunc ;==>AllDone
; Function SetPort($mode=1)
; Creates a form for the port settings
;Parameter $mode sets the return value depending on whether the port was set
;Returns 0 if $mode <> 1
; -1 If` the port not set and $mode is 1
Func SetPort($mode = 1);if $mode = 1 then returns -1 if settings not made
Local $sportSetError
Opt("GUIOnEventMode", 0);keep events for $Form2, use GuiGetMsg for $Form3
#Region ### START Koda GUI section ### Form=d:\my documents\miscdelphi\commg\examplecommsetport.kxf
$Form3 = GUICreate("COMMG Example - set Port", 422, 279, 329, 268, BitOR($WS_MINIMIZEBOX, $WS_CAPTION, $WS_POPUP, $WS_GROUP, $WS_BORDER, $WS_CLIPSIBLINGS, _
$DS_MODALFRAME), BitOR($WS_EX_TOPMOST, $WS_EX_WINDOWEDGE))
$Group1 = GUICtrlCreateGroup("Set COM Port", 18, 8, 288, 252)
$CmboPortsAvailable = GUICtrlCreateCombo("", 127, 28, 145, 25, BitOR($GUI_SS_DEFAULT_COMBO, $CBS_SORT))
$CmBoBaud = GUICtrlCreateCombo("9600", 127, 66, 145, 25, BitOR($CBS_DROPDOWN, $CBS_AUTOHSCROLL, $CBS_SORT, $WS_VSCROLL))
GUICtrlSetData(-1, "10400|110|115200|1200|128000|14400|150|15625|1800|19200|2000|2400|256000|28800|38400|3600|38400|4800|50|56000|57600|600|7200|75")
$CmBoStop = GUICtrlCreateCombo("1", 127, 141, 145, 25)
GUICtrlSetData(-1, "1|2|1.5")
$CmBoParity = GUICtrlCreateCombo("", 127, 178, 145, 25)
GUICtrlSetData(-1, "odd|even|none|Mark|Space")
GUICtrlSetData(-1, "none")
$Label2 = GUICtrlCreateLabel("Port", 94, 32, 23, 17)
$Label3 = GUICtrlCreateLabel("baud", 89, 70, 28, 17)
$Label4 = GUICtrlCreateLabel("No. Stop bits", 52, 145, 65, 17)
$Label5 = GUICtrlCreateLabel("parity", 88, 182, 29, 17)
$CmboDataBits = GUICtrlCreateCombo("8", 127, 103, 145, 25)
GUICtrlSetData(-1, "7|8")
$Label7 = GUICtrlCreateLabel("No. of Data Bits", 38, 107, 79, 17)
$ComboFlow = GUICtrlCreateCombo("NONE", 127, 216, 145, 25)
GUICtrlSetData(-1, "NONE|XOnXOff|Hardware (RTS, CTS)")
$Label1 = GUICtrlCreateLabel("flow control", 59, 220, 58, 17)
GUICtrlCreateGroup("", -99, -99, 1, 1)
$BtnApply = GUICtrlCreateButton("Apply", 315, 95, 75, 35, $BS_FLAT)
GUICtrlSetFont(-1, 12, 400, 0, "MS Sans Serif")
$BtnCancel = GUICtrlCreateButton("Cancel", 316, 147, 76, 35, $BS_FLAT)
GUICtrlSetFont(-1, 12, 400, 0, "MS Sans Serif")
GUISetState(@SW_SHOW)
#EndRegion ### END Koda GUI section ###
WinSetTitle($Form3, "", $settitle);ensure a change to Koda design doesn't stop script working
$mainxy = WinGetPos($Form2)
WinMove($Form3, "", $mainxy[0] + 20, $mainxy[1] + 20)
$portlist = _CommListPorts(0);find the available COM ports and write them into the ports combo
If @error = 1 Then
MsgBox(0, 'trouble getting portlist', 'Program will terminate!')
Exit
EndIf
For $pl = 1 To $portlist[0]
$portnum = StringReplace($portlist[$pl], "COM", '')
if StringLen($portnum) = 1 then $portnum = ' ' & $portnum
$portlist[$pl] = 'COM' & $portnum
GUICtrlSetData($CmboPortsAvailable, $portlist[$pl]);_CommListPorts())
Next
GUICtrlSetData($CmboPortsAvailable, $portlist[1]);show the first port found
GUICtrlSetData($ComboFlow, $FlowType[$setflow])
_GUICtrlComboBox_SetMinVisible($CmBoBaud, 10);restrict the length of the drop-down list
$retval = 0
While 1
$msg = GUIGetMsg()
If $msg = $BtnCancel Then
If Not $mode Then $retval = -1
ExitLoop
EndIf
If $msg = $BtnApply Then
$comboflowsel = GUICtrlRead($ComboFlow)
For $n = 0 To 2
If $comboflowsel = $FlowType[$n] Then
$setflow = $n
ConsoleWrite("flow = " & $setflow & @CRLF)
ExitLoop
EndIf
Next
$setport = StringReplace(GUICtrlRead($CmboPortsAvailable), 'COM', '')
$ParitySel = GUICtrlRead($CmBoParity)
For $n = 0 To 4
If $ParitySel = $ParityType[$n] Then
$SetParity = $n
ExitLoop
EndIf
Next
$setStop = StringReplace(GUICtrlRead($CmBoStop), '.', '');replace 1.5 with 15 if needed
$resOpen = _CommSetPort($setport, $sportSetError, GUICtrlRead($CmBoBaud), GUICtrlRead($CmboDataBits), $SetParity, $setStop, $setflow)
;$resOpen = _CommSetPort($setPort,$sportSetError,GUICtrlRead($CmBoBaud),GUICtrlRead($CmboDataBits),GUICtrlRead($CmBoParity),GUICtrlRead($CmBoStop),$setFlow)
if $resOpen = 0 then
ConsoleWrite($sportSetError & @LF)
Exit
EndIf
Sleep(1000)
ConsoleWrite('ok' & @CRLF)
;next
$mode = 1;
ExitLoop
EndIf
;stop user switching back to $form2
If WinActive($maintitle) Then
ConsoleWrite('main is active' & @CRLF)
If WinActivate($settitle) = 0 Then MsgBox(0, 'not found', $settitle)
EndIf
WEnd
ConsoleWrite(244 & @CRLF)
GUIDelete($Form3)
ConsoleWrite(247 & @CRLF)
WinActivate($maintitle)
ConsoleWrite(248 & @CRLF)
Events()
Return $retval
EndFunc ;==>SetPort
|